Troubleshoot Common Problems In POCO M3 Pro 5G [PROVEN FIXES]

The POCO M3 Pro 5G is one of the best budget smartphones you can buy in 2019. If you’re having problems with your phone, we’ve got solutions for some of the most common issues.

The poco m3 issue dead boot is a problem that has been present for a while. A proven fix to the problem is to jump into the recovery mode and do a factory reset.

Hello there, friends, and welcome back to the fantastic article. In this post, we’ll look at how to fix frequent issues with the Poco M3 Pro 5G.

Before we get started, let’s go over some of the phone’s specifications.

Poco, a Xiaomi sub-brand, has introduced a new phone to its M-series lineup, the Poco M3 Pro 5G, which features a 6.5-inch IPS FHD+ display with a 90Hz refresh rate.

According to GSMarena, the Poco M3 Pro 5G is powered by the newest Octa-core MediaTek Dimensity 700 5G (7 nm) chipset and comes in TWO variants: 4GB RAM, 64GB storage, and 6GB RAM, 128GB storage.

When it comes to the battery and operating system, the Poco M3 Pro 5G is backed by a large 5000 mAh battery with 18W fast charging and runs on the newest MIUI 12 based on Android 11.

When it comes to cameras, it’s a no-brainer.

With a 48-megapixel main camera, a 2-megapixel macro camera, and a 2-megapixel depth sensor, the Poco M3 Pro 5G features a triple-camera system.

That’s all there is to it.

Many people are experiencing difficulties and problems with the Poco M3 Pro 5G smartphone after using it for a while.

But don’t worry; in today’s tutorial, I’ll show you how to troubleshoot Common Poco M3 Pro 5G Problems and provide a working solution.

Troubleshoot Poco M3 Pro 5G Network, Heating, Camera, and Other Issues

First and foremost, we will cover numerous frequent difficulties and problems with the Poco M3 Pro 5G in this post, as well as remedies to these issues.

All of the actions and cures I’ve listed here have been tried and true, so keep reading to the conclusion.

Don’t worry, I’ve listed 12 typical issues and their remedies, a difficulty that nearly everyone encounters.

I am certain that by following this instruction today, you will be able to solve the issue on your phone.

Please take your time to go through all of the actions and treatments outlined in this article. This tutorial will ultimately be of use to you.

Problem – Poco M3 Pro 5G has a network issue.

If you have a network issue with your Poco M3 Pro 5G? So don’t worry, I’ve included some helpful suggestions below to help you resolve the network issue on your Poco M3 Pro 5G.

Solutions:

For a few seconds, toggle the airplane mode on and off.
Turn off your SIM card for a while and then turn it back on.
Make sure your device is in Safe mode before proceeding. Here’s a complete list of resources.
Reset your device’s network settings once.
Also, make sure your software is up to date.
If the issue persists, the final solution is to reset your Poco M3 Pro 5G to factory settings.
That’s all there is to it.

Read More: Redmi Note 10 Pro Network Issues and How to Solve Them!

Problem – Is the Poco M3 Pro 5G overheating?

When you play games or utilize features or applications that demand a lot of power, your phone’s battery drains quickly, causing your phone to heat up and get uncomfortable.

Solutions:

Turn off Wi-Fi, GPS, Bluetooth, and other connection options if you aren’t using them.
Reduce screen brightness by turning off auto-brightness.
Remove any applications that you aren’t utilizing.
Uninstall any apps that you don’t need on your phone.
In Safe Mode, look at your smartphone.
If available, update your program to the most recent version.
If all of the preceding methods fail to resolve your issue, your final choice is to factory reset your Poco M3 Pro 5G.
That’s all there is to it.

The Poco M3 Pro 5G has a slow or lagging user interface.

Solutions:

Remove the program from the Recent tab that you aren’t using.
Restart your Poco M3 Pro 5G after that. This shuts off any background processes that aren’t needed.
Turn off the battery saving mode on your phone if it is on.
While charging your phone, do not play games or open any applications.
Clear the Poco M3 Pro 5G’s System cache partition.
Do you still have issues with the touch screen? If that’s the case, your Poco M3 Pro 5G’s last choice is to factory reset it.
That’s all there is to it.

Must Read: How to Fix the OnePlus Nord CE 5G’s Overheating Issue!

Problem – Poco M3 Pro 5G Battery Drains Quickly

If you’re experiencing battery depletion with your Poco M3 Pro 5G, you’re not alone.

Follow the instructions below to resolve the issue of battery depletion on your Poco M3 Pro 5G:

Solutions:

To begin, disable auto-brightness and adjust the brightness to your preferences.
Make careful you choose the shortest possible screen timeout time.
- Go to Display > Screen timeout in Settings. Choose the shortest possible screen time (Recommended 30 Seconds)
Activate the Power Saving Mode.
Optimize all of your applications.
- Go to the Battery and Device Care section of the Settings menu. Select Optimize Now from the drop-down menu.
That’s all there is to it.

Apps on the Poco M3 Pro 5G crash unexpectedly.

Users of the Poco M3 Pro 5G have been experiencing app crashes since the smartphone’s launch:

Don’t worry, this app crash issue isn’t exclusive to the Poco M3 Pro 5G phone; other devices have also had similar issue.

Solutions:

To begin, reset the app’s preferences.
- To do so, go to Apps > Settings > Apps > Apps > Apps > Apps > Apps > Apps > Apps Activate the three-dot menu. Last but not least, tap Reset App Preferences.
Check to see whether there is a new software update available for your phone, and if so, install it.
If your phone is experiencing issues as a result of a single program, go to Settings Apps, select that app, and delete its data and cache.
After you’ve completed all of these instructions, restart your device.
That’s all there is to it.

Touch screen problems with the Poco M3 Pro 5G

If your Poco M3 Pro 5G’s touch screen is sluggish or unresponsive, I’ve included some simple instructions below to help you resolve the issue.

Solutions:

First, restart your device to see whether your issue has been resolved.
Make sure your phone’s screen is nice and clean.
Taking off the old screen protector is a must.
In Safe Mode, check your Poco M3 Pro 5G.
Clear the phone’s System cache partition.
Do you still have issues with the touch screen? If that’s the case, your Poco M3 Pro 5G’s last choice is to factory reset it.
That’s all there is to it.

The fingerprint sensor isn’t functioning, which is a problem. 5G Poco M3 Pro

Users of the Poco M3 Pro 5G have reported issues with the device’s fingerprint reader on many forums and discussion sites.

This issue may occur for a variety of causes; tell us how to resolve it:

Solutions:

Make certain you’re using the same finger you used to set up the fingerprint.
This issue may potentially be caused by a malfunctioning fingerprint sensor on your phone; check to see whether the fingerprint sensor is scratched or broken.
Remove the previous fingerprint from your Poco M3 Pro 5G and replace it with a fresh one.
- Go to Biometrics and Security > Fingerprints > Settings. Replace your previous PIN, pattern, or password with your new one. Fingerprints that have been registered Remove the item and then remove it again. Add a fresh fingerprint to the mix.
Do you still have issues with the fingerprint sensor? If that’s the case, you may wipe the phone’s cache partition.
That’s all there is to it.

Fix Fingerprint sensor in iQOO Z3 isn’t working?

Poco M3 Pro 5G Issue – Unable to Send Text Messages

Solutions:

First, make sure the phone number you’d want to send the message to isn’t banned.
Clear the cache of your Poco M3 Pro 5G’s default messaging app.
Delete outdated messages if you don’t need them.
Restart your Poco M3 Pro 5G and see whether your problem has been resolved.
Activate flying mode once again. Turn off the light.
That’s all there is to it.

Problem – The Poco M3 Pro 5G is unable to make or receive phone calls.

Solutions:

Remove your SIM card and re-insert it into your phone.
Restart your device after that.
Install any new software updates that are available for your Poco M3 Pro 5G.
Check to see whether your Poco M3 Pro 5G is in flight mode, and if it is, switch it off.
Reset the network settings on your phone.
That concludes the discussion.

Bluetooth isn’t functioning with the Poco M3 Pro 5G?

Bluetooth is often switched off owing to a low battery or because Bluetooth is not enabled in the phone.

Solutions:

Always keep an eye out for new software updates.
Also, check sure the Bluetooth device is turned on and that both devices have Bluetooth enabled.
To connect to Bluetooth, both phones must be within range of each other, therefore double-check the Bluetooth connection range.
Restart both devices at the same time.
If the issue persists, try resetting the network settings on your device.
That’s all there is to it.

Read this article to find out why your Galaxy A22 5G’s Bluetooth isn’t functioning correctly. What to Do About It!

Microphone on the Poco M3 Pro 5G isn’t functioning.

Solutions:

To begin, restart the phone and record your voice to see whether the microphone is working properly. The microphone is fine if you enjoy the sound quality of the recorded voice.
Once, boot your phone into safe mode; if your phone’s microphone functions normally in safe mode, the issue is with a third-party program that you have installed; remove it.
Check for any new software updates on your phone and, if any are available, install them.
If the issue persists, you should factory reset your Poco M3 Pro 5G.
That’s all there is to it.

Problem – The Poco M3 Pro 5G keeps freezing or crashing.

It seems to be extremely terrible and upsetting if your Poco M3 Pro 5G phone is frequently stalling or crashing.

But don’t worry, I’ve listed some troubleshooting methods below that may help you resolve your issue without having to submit your phone to a Xiaomi service center.

Solutions:

Force-reboot your Poco M3 Pro 5G first.
- For a few seconds, press and hold the Volume Down and Power buttons at the same time.
Make sure you have the most recent version of your software.
Once you’ve done that, restart your device in Safe Mode. Here’s How to Get Started
If a certain application is causing this issue on your Poco M3 Pro 5G, try clearing the cache and data for that application.
- Select the Crashing App in Settings > Apps > Storage > Clear Cache & Clear Data.
If the issue persists, you should factory reset your Poco M3 Pro 5G.
That’s all there is to it.

Fixing Touch Screen Issues on the Samsung Galaxy A52 5G is a must-read.

Conclusion:

So, in this tutorial, I’ve covered all of the Poco M3 Pro 5G’s frequent issues.

Above, I’ve highlighted several significant problems as well as a tried-and-true method for resolving them. I hope you enjoyed reading this post.

Please let us know if you have any additional issues with your Poco M3 Pro 5G in the comments area below.

I’ll do my best to fix your problem as quickly as possible, and thank you for sticking with this tutorial all the way to the finish.

The poco m3 camera issue is a problem that has been present for a while. In this article, we will go over the most common problems and provide proven fixes to get your POCO M3 Pro 5G working again.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What is the problem of Poco M3?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
The problem with Poco M3 is that it has a low battery capacity.”}},{“@type”:”Question”,”name”:”How do I fix my Poco M3?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
The Poco M3 has a battery that will need to be replaced. You can purchase one from our website here: https://www.pocophone-us.com/products/”}},{“@type”:”Question”,”name”:”How do you fix a black screen on a Poco M3?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
The black screen issue is most likely due to a faulty display. If the problem persists, you may need to replace your phones display.”}}]}